Northdale Cabinet Refacing logoNorthdale Cabinet RefacingNorthdale, FL
Menu
bathroom vanity refacing in Northdale, FL

Northdale Cabinet Refacing

Bathroom Vanity Refacing in Northdale, FL

Bathroom vanity refacing in Northdale, FL. Moisture-rated doors, drawer fronts, and sealed finishes with free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Northdale and nearby communities.

Does your vanity look swollen along the bottom edge, or peeling near the sink cutout? That's humidity damage, and it's common on original builder-grade vanities across Northdale.

Bathroom vanities take on more moisture exposure than kitchen cabinets, day in and day out. This service treats that difference seriously. Northdale Cabinet Refacing uses sealed, moisture-rated materials and finishes on every vanity reface, not kitchen-grade products stretched into a wet room.

What's included

What's Included

Typically included

  • New vanity doors and drawer fronts
  • Resurfaced box exteriors in a moisture-resistant finish
  • Sealed edges and seams around the countertop line

Optional

  • Soft-close vanity hinges
  • Updated corrosion-resistant hardware
  • Matching finish across double-vanity setups

Customer prep

  • Clear vanity contents and remove items from under-sink storage
  • Confirm faucet and countertop stay as-is unless discussed

Bathroom Vanity Refacing

Process

  • Vanity Inspection — The vanity structure is checked for moisture damage before refacing starts.
  • Finish Selection — Moisture-resistant finishes are chosen to suit bathroom humidity conditions.
  • Surface Resurfacing — Vanity surfaces are resurfaced with new veneer or laminate materials.
  • Door and Drawer Replacement — New doors and drawer fronts are fitted to match the vanity's updated style.
  • Sealant Application — A protective sealant is applied to guard against daily moisture exposure.
  • Final Inspection — The finished vanity is checked for proper fit, finish, and water resistance.

Materials

Materials for Humid Bathrooms

  • Moisture-Resistant Laminate photo

    Moisture-Resistant Laminate

    This laminate is designed to withstand humidity common in bathroom settings, especially in Florida where AC-to-ambient swings are constant.

  • Water-Sealed Veneer photo

    Water-Sealed Veneer

    Sealed veneer resists warping and moisture damage over time near sinks and shower splash zones.

  • Vanity Door Panels photo

    Vanity Door Panels

    New panels are sized to fit standard and custom vanity openings found in Northdale's original builder layouts.

  • Corrosion-Resistant Hardware photo

    Corrosion-Resistant Hardware

    Hardware is selected to resist rust and corrosion in humid environments, a real concern in coastal-adjacent Tampa Bay bathrooms.

  • Caulk and Sealant photo

    Caulk and Sealant

    Quality sealants protect seams and edges from water infiltration at the countertop joint.

  • Soft-Close Vanity Hinges photo

    Soft-Close Vanity Hinges

    Hinges provide quiet, controlled closing for vanity doors daily, without the slam that loosens screws over time.

Cost

What Does a Bathroom Vanity Refacing Cost in Northdale?

Pricing scales down from kitchen jobs since vanities are smaller. Ranges below are ballparks, confirmed with a free estimate.

Project typeTypical rangeWhat’s included
Single vanity, door-only$800–$1,800new doors and drawer fronts, existing hardware reused.
Single vanity, full reface$1,800–$3,500box resurfacing, new doors, hardware, and sealant.
Double vanity, full reface$3,200–$6,000matched finish across both sides with upgraded hardware.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and Codes for Bathroom Vanity Refacing

Check with Hillsborough County if your project goes beyond cosmetic work.

Typically needs a permitOften no permit
Relocating plumbing lines behind the vanityDoor and drawer front replacement
Altering the vanity footprint or countertop support structureResurfacing with veneer or laminate
—Hardware and hinge upgrades

Before & after

Before and After Bathroom Vanity Refacing

  • bathroom vanity refacing in Northdale, FL
    Before
  • bathroom vanity refacing in Northdale, FL
    After

FAQs

Bathroom Vanity Refacing FAQs

Can you reface cabinets that are particle board or only solid wood?

Both. Particle board vanities reface fine as long as there's no active swelling or delamination from water. Solid wood vanities often need less prep work overall.

Will refacing fix peeling thermofoil cabinets, or do those need full replacement?

Peeling thermofoil can usually be refaced if the box underneath is sound. If there's moisture damage soaked into the particle board, that section may need a door or box swap instead.

How is vanity refacing different from kitchen cabinet refacing?

Vanities see more direct moisture exposure near sinks, so materials and sealants are chosen specifically for bathroom humidity rather than general kitchen use.

How long does a vanity refacing job take?

Most single-vanity jobs finish in one to two days once materials arrive, faster than a full kitchen since there's less surface area to cover.

Is DIY vanity refacing a good idea?

Simple hardware swaps are fine to DIY. Sealing seams properly against water takes more care, and a poorly sealed vanity reface can let moisture back in within a year.

Next step

Get a Bathroom Vanity Refacing Estimate in Northdale

Call (727) 334-0304 or request a free estimate through the contact form. Home · Cabinet Refinishing & Painting

How it works

Our process

  1. Vanity Inspection photo
    Step 1

    Vanity Inspection

    The vanity structure is checked for moisture damage before refacing starts.

  2. Finish Selection photo
    Step 2

    Finish Selection

    Moisture-resistant finishes are chosen to suit bathroom humidity conditions.

  3. Surface Resurfacing photo
    Step 3

    Surface Resurfacing

    Vanity surfaces are resurfaced with new veneer or laminate materials.

  4. Door and Drawer Replacement photo
    Step 4

    Door and Drawer Replacement

    New doors and drawer fronts are fitted to match the vanity's updated style.

  5. Sealant Application photo
    Step 5

    Sealant Application

    A protective sealant is applied to guard against daily moisture exposure.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The finished vanity is checked for proper fit, finish, and water resistance.

Ask about Bathroom Vanity Refacing

Tell us about the project and how to reach you.

Call (727) 334-0304