Northdale Cabinet Refacing logoNorthdale Cabinet RefacingNorthdale, FL
Menu
cabinet refacing in Northdale, FL

Northdale Cabinet Refacing

Cabinet Refacing in Northdale, FL

Cabinet Refacing in Northdale, FL. New doors, veneer, and hardware over your existing boxes, no demo required, free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Northdale and nearby communities.

Dated oak doors and worn laminate don't mean your cabinets need to go in a dumpster. Cabinet refacing keeps the boxes you already have, the ones bolted into your walls, and replaces everything you touch and see: doors, drawer fronts, exposed panels, and hardware.

Northdale Cabinet Refacing starts every job with a box check. Most of the builder-grade cabinets in this part of Hillsborough County are structurally solid, just dated. If yours are too, refacing gets you a new kitchen look without pulling anything off the wall.

What's included

What's Included

Typically included

  • New door and drawer fronts matched to your chosen style
  • Veneer applied to exposed cabinet box surfaces
  • Edge banding on visible panel edges
  • New hinges and matching hardware

Optional

  • Soft-close hinge and slide upgrades
  • Crown molding at the cabinet tops
  • Pull-out shelving or drawer organizers

Customer prep

  • Clear counters and cabinet interiors before the crew arrives
  • Decide on a door style ahead of the material order

How it works

Our Cabinet Refacing Process

  1. Cabinet Assessment photo
    Step 1

    Cabinet Assessment

    Existing cabinet boxes are inspected for structural soundness before refacing begins.

  2. Design Consultation photo
    Step 2

    Design Consultation

    Clients review finish and style samples to plan the new cabinet appearance.

  3. Box Preparation photo
    Step 3

    Box Preparation

    Surfaces are cleaned and lightly sanded to help new materials adhere properly.

  4. Veneer Application photo
    Step 4

    Veneer Application

    Matching veneer is applied to exposed cabinet surfaces for a smooth finish.

  5. New Door Fitting photo
    Step 5

    New Door Fitting

    Replacement doors and drawer fronts are installed to complete the updated look.

  6. Quality Check photo
    Step 6

    Quality Check

    Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.

Materials

Materials and Methods for Cabinet Refacing

Northdale's humidity and AC cycling put real stress on cabinet surfaces over the years. These materials are chosen to hold up.

  • Rigid Thermofoil photo

    Rigid Thermofoil

    A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance that resists the swelling common on older Northdale subdivision cabinets.

  • Wood Veneer photo

    Wood Veneer

    Natural wood veneer offers an authentic grain look over existing cabinet boxes, a good fit when the original oak boxes underneath are still sound.

  • Adhesive Bonding Agents photo

    Adhesive Bonding Agents

    Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even with Florida's summer humidity swings.

  • Matching Drawer Fronts photo

    Matching Drawer Fronts

    New fronts are crafted to match replacement doors for a unified design across the whole kitchen.

  • Edge Banding photo

    Edge Banding

    Edge banding finishes exposed panel edges for a clean, professional look that resists peeling at the seams.

  • Cabinet Hardware Sets photo

    Cabinet Hardware Sets

    Coordinated hardware sets complete the refaced cabinetry with a polished, consistent finish.

Cost

What Does a Cabinet Refacing Cost in Northdale?

Refacing almost always lands well under full cabinet replacement, since the boxes stay put. These are ballpark ranges, not a locked quote. A free estimate gets you a real number after a specialist sees your kitchen in person.

Project typeTypical rangeWhat’s included
Door-only update$2,500–$5,500new doors and drawer fronts on sound boxes, existing hardware reused.
Full kitchen reface$6,000–$14,000new veneer on all boxes, doors, drawer fronts, and hardware.
Full reface with upgrades$12,000–$20,000adds soft-close hinges, crown molding, and an island or peninsula match.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and Codes for Cabinet Refacing

Verify specifics with Hillsborough County before scheduling, since permit needs can shift based on your project.

Typically needs a permitOften no permit
Moving plumbing or electrical to change a cabinet layoutDoor and drawer front replacement
Removing or relocating cabinet boxesVeneer resurfacing over existing boxes
Structural wall changes to widen an openingHardware swaps and soft-close upgrades

DIY vs pro

DIY vs Hiring a Pro for Cabinet Refacing

DIYHire a pro
Swapping a few hinges or hardware pullsBox prep and veneer adhesion across a full kitchen
Installing a basic stock door kit on a simple, square openingMatching finish color consistently on every visible surface
Touching up minor scratches on existing finishesPrecise hinge boring so soft-close hardware actually closes soft

Before & after

Before and After Cabinet Refacing

  • cabinet refacing in Northdale, FL
    Before
  • cabinet refacing in Northdale, FL
    After

FAQs

Cabinet Refacing FAQs

Is cabinet refacing worth it or should I just replace the cabinets?

If your cabinet boxes are solid, which most Northdale builder-grade kitchens are, refacing gets a new look for a fraction of full replacement cost and far less disruption.

Can you reface cabinets that are particle board or only solid wood?

Both, as long as the boxes aren't swollen or water-damaged. We check box condition at the estimate before quoting veneer or door-only work.

What's the difference between refacing and painting cabinets?

Refacing replaces doors, drawer fronts, and exposed surfaces with new material. Painting keeps your existing doors and just changes the finish color. Refacing handles deeper wear; painting is for boxes and doors that are still in good shape.

How do I know if my cabinet boxes are in good enough shape to reface?

Sound boxes have tight joints, no swelling around water lines, and hinges that still hold screws. A specialist checks this during your estimate before recommending refacing over replacement.

Are soft-close hinges worth adding when refacing?

Most homeowners add them since the door and drawer fronts are already off. It's a small add-on cost during a reface versus a separate project later.

Next step

Get a Cabinet Refacing Estimate in Northdale

Call (727) 334-0304 or request a free estimate through the contact form. Home · Kitchen Cabinet Refacing

Ask about Cabinet Refacing

Tell us about the project and how to reach you.

Call (727) 334-0304