
Northdale Cabinet Refacing
Commercial Cabinet Refacing in Northdale, FL
Commercial cabinet refacing in Northdale, FL for offices, break rooms, and retail spaces, durable materials, scheduled around business hours.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Northdale and nearby communities.
Commercial cabinet refacing covers break rooms, reception desks, retail counters, and office kitchenettes where cabinet boxes are still sound but doors, drawer fronts, and laminate surfaces have worn out from daily traffic. Instead of ripping out millwork and closing a space for weeks, Northdale Cabinet Refacing resurfaces the existing boxes with commercial-grade materials built to handle higher use than a residential kitchen.
Work gets scheduled around business hours, not the other way around. Many Northdale-area offices and small retail spaces run on tight hours, so projects are often phased or scheduled after close to avoid shutting down operations during the workday.
What's included
What's Included with Commercial Cabinet Refacing
Typically included: box assessment for commercial wear, new door and drawer fronts, veneer or laminate resurfacing on exposed boxes, reinforced hinges and heavy-duty slides, final function check.
Optional: antimicrobial surface coating for break rooms or shared spaces, impact-resistant panels for high-traffic counters, matched end panels for a cohesive look across multiple cabinet runs.
Customer prep: clear access to the cabinet area during scheduled work hours, note any equipment or fixtures that need to stay in place, flag any areas with known water or impact damage before the estimate.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Commercial Cabinet Refacing Process Works
Step 1Site Evaluation
Commercial spaces are assessed to plan refacing around daily operations.
Step 2Scheduling Coordination
Work is scheduled to minimize disruption to business activities.
Step 3Durable Material Selection
Commercial-grade materials are chosen for high-traffic durability needs.
Step 4Box and Surface Prep
Cabinet boxes are prepared to withstand frequent commercial use.
Step 5Refacing Installation
New surfaces, doors, and hardware are installed across commercial cabinetry.
Step 6Compliance Check
Finished work is reviewed to ensure it meets commercial use standards.
Materials
Materials and Methods for Commercial Cabinet Refacing
Material choices here lean toward durability over decoration, since commercial cabinets see more daily contact than a home kitchen.

Commercial-Grade Laminate
Heavy-duty laminate withstands frequent use in commercial environments, holding up well against Florida's year-round AC cycling and humidity.

Reinforced Hinges
Reinforced hinges handle increased daily use in commercial settings without loosening or sagging over time.

Impact-Resistant Panels
Panels resist dents and damage common in high-traffic areas like break rooms and retail counters.

Heavy-Duty Drawer Slides
Slides support frequent, repeated use in commercial cabinetry, typical in shared office kitchens.

Antimicrobial Surface Coating
Coatings help reduce surface bacteria in commercial applications, useful for break rooms and shared spaces.

Commercial Hardware Sets
Durable hardware sets are built for long-term commercial performance under daily staff use.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Commercial Cabinet Refacing Take?
- 01
Stage 1
Commercial jobs are scoped around the business's operating hours, so timing depends on how the space is phased.
- 02
Site evaluation and quote
same day to a few days - 03
Material order lead time
2–3 weeks - 04
Box prep and install
3–5 daysoften split into after-hours or weekend phases
- 05
Final compliance check
same dayas install completion
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Commercial Cabinet Refacing
Always verify with Hillsborough County and your building's property management before scheduling commercial work.
| Typically needs a permit | Often no permit |
|---|---|
| Layout changes that move plumbing or electrical for a break room sink or appliance | Door and drawer front replacement on existing boxes |
| Structural changes to walls or built-in millwork | Laminate or veneer resurfacing |
| — | Hardware and slide upgrades |
| — | Surface coating or sealant application |
Need help with permits?
Get a Free EstimateCost
What Does a Commercial Cabinet Refacing Cost in Northdale?
Commercial pricing depends on cabinet count, material grade, and how much after-hours scheduling is needed.
| Project type | Typical range | What’s included |
|---|---|---|
| Hardware and surface refresh | $2,000–$6,000 | hinge/slide upgrades plus laminate resurfacing on existing boxes. |
| Full break room or kitchenette reface | $6,000–$15,000 | new doors, drawer fronts, and commercial-grade laminate across all cabinets. |
| Multi-room or retail counter refacing | $15,000–$35,000+ | coordinated scheduling across several spaces with matched finishes. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Get a free estimate to get an exact number for your space.
### DIY vs Hiring a Pro for Commercial Cabinet Refacing
#### DIY - Swapping a few cabinet pulls in a small break room - Minor touch-up repairs on existing laminate chips
#### Hire a pro - Matching commercial-grade laminate across multiple cabinet runs without visible seams - Scheduling and phasing work around business hours without disrupting operations - Installing reinforced hinges and heavy-duty slides rated for daily commercial use
When to call
When to Call for Commercial Cabinet Refacing
Call (727) 334-0304 or request a free estimate to get your commercial space scheduled.
- Break room or office cabinets show heavy wear from daily staff use
- Laminate is chipping or peeling at counters and cabinet edges
- Drawer slides and hinges have loosened from frequent use
- You're updating a retail or office space and want it done without closing for weeks
Seeing warning signs?
Get a Free EstimateBefore & after
Before and After Commercial Cabinet Refacing

Before 
After
FAQs
Commercial Cabinet Refacing FAQs
Can you work around our business hours?
Commercial jobs are typically scheduled after close or phased across sections so the space stays operational during the workday.
Do you use different materials for commercial spaces than homes?
Commercial jobs usually get heavier-duty laminate, reinforced hinges, and impact-resistant panels built for higher daily traffic than a home kitchen sees.
How long does a break room refacing take?
A full break room or kitchenette reface usually takes 3-5 days of on-site work once materials arrive, often split across after-hours sessions.
Is commercial cabinet refacing cheaper than replacing built-in millwork?
Refacing existing boxes with new doors and surfaces typically costs significantly less than tearing out and replacing commercial millwork.
Do you need access to the space during business hours?
Not always. Many projects are scheduled before or after hours, or on weekends, depending on the business's operating schedule.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet Refacing in Northdale, FL. New doors, veneer, and hardware over your existing boxes, no demo required, free estimates.

Kitchen Cabinet Refacing
Kitchen cabinet refacing near me in Northdale, FL. Full-kitchen door, drawer, and finish updates with free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Northdale, FL. Moisture-rated doors, drawer fronts, and sealed finishes with free estimates.
Ask about Commercial Cabinet Refacing
Tell us about the project and how to reach you.